TurboXS
Standard Boost Controller
TurboXS Standard Boost Controller [ click here for high-performance ] [ click here for dual-stage ]
Standard High-Performance Dual Stage
Possibly the most effective way to generate more power from your turbocharged vehicle is to simply increase the boost pressure. This can be achieved quickly and very cost effectively with the TurboXS Standard Boost Controller.  The TurboXS Standard Boost Controller is installed in line with the pressure hose running from the positive pressure side of the turbo to the waste gate actuator system.  It can be used on vehicles with internal and external wastegate systems, and on vehicles fitted with factory electronic boost control systems.
The Standard Boost Controller Kit includes:
  1. TurboXS Standard Boost Controller
  2. Mounting Bracket & Screws
  3. Hose Extension
  4. Installation Guide
  5. Screwdriver
  6. Display Box
  7. Hose Clamps

  Part # Description Price
SBC TurboXS Standard Boost Controller $79.00/kit

Quick & Easy to Install

Cut the wastegate pressure hose and insert the supply pressure hose onto the silver-colored nipple of the boost controller. Insert the wastegate supply hose onto the blue-colored nipple. Secure the hoses with hose clamps. Alternatively, use the hose extension, which negates the need to cut the pre-existing pressure hose. The Boost Controller can be mounted with mounting bracket.

Simple Accurate Adjustment

The boost pressure is adjusted via the adjusting screw located internally on the top of the TurboXS Boost Controller. The vehicle's boost pressure can be increased by winding the adjusting screw in the counter-clockwise direction. Once the boost pressure has been increased, winding the adjusting screw in the clockwise direction will decrease the boost pressure. Typically, one full turn of the adjusting screw in the counter-clockwise direction will result in a turbo boost increase of one psi.
 

Don't see what you're looking for?
Give us a call at (321) 725-3159 or email us at info@alamomotorsports.com